|
| General |
Stud Size |
1/4 |
|
| Dimension Information |
E* (inches) |
.25 |
A (inches) |
.53 |
B (inches) |
.61 |
C (inches) |
1.58 |
D (inches) |
.81 |
|
| Specifications |
Circular Mil Area |
10,380 - 52,480 |
Rectangular Wire Range Thickness (inches) |
.10 - .16 |
Rectangular Wire Range Width (inches) |
.10 - .26 |
Round Wire Range AWG |
12(b) - 2(c) |
|
| Tooling |
Tooling |
13100A, 13400, TBM15i |
 Connector & Tooling Chart |
Click Here |
|
| Packaging |
Order Multiple |
100 |
Inner Package |
100 |
Outer Package |
500 |
Package Height |
5.7 |
Package Length |
4.1 |
Package Width |
24 |
T&B Sold in UOM |
Each |
T&B Weight Per UOM |
3.05 lbs. per 100 |
|
| Application Support |
 Product Selector |
Click Here |
 T&B Instruction Sheets |
ta00193-tb2 |
Overview |
Click Here |
|
| Notes |
*Note |
Reference dimension (crimped height). See installing die illustration for gauging. |
**Note |
Not recommended for aluminum magnet wire finer than 21 gauge or 0.4 mm². (a) Four wires max. (b) Six wires max. (c) Six wires max. each barrel (d) Conductors heavier than 6 AWG or 13 mm² require special dies. Contact Thomas & Betts for assistance. (e) Crimping dies may not bottom. Connector height will depend on number and size of wires in barrel. Pump must deliver 9800 psi minimum. |
- Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to determine their suitability for the intended purpose.
|
|
| Certifications |
RoHS Compliance |
Yes (exemption 06) Generate Compliance Certificate |
